Yamaha clavinova pf p-100 with no sound


(Ann Arbor, MI, USA)

After a move, my yamaha will turn on, but does not make any sound. I saw someone mention doing a factory reset to try to restore sound. How do I do a factory reset?


Alternately, how do I find a reputable person who would repair it despite how old it is?

Comments for Yamaha clavinova pf p-100 with no sound

Average Rating starstarstarstarstar

Click here to add your own comments

Feb 05, 2020
Rating
starstarstarstarstar
Yamaha clavinova pf p-100 fără sunet
by: Anonymous

Salutare la totata lumea activa pe acest forum.Am si eu o problema la fel.Copilul meu mic de 4 ani a apasat cred ca citeva butoane si a dezactivat claviatura.Acum functioneaza numai doua sunete concometente,sunetele de baza nu lucreaza fiecare in parte.Va rog mul sa ma ajutati sa restez pianul la forma initiala din fabrica.Multumesc anticipat.

May 01, 2019
Rating
starstarstarstarstar
speaker switch
by: Anonymous

found switch, problem solved, many thanks

Jan 12, 2019
Rating
starstarstarstarstar
How I solved my piano-has-no-sound problem
by: Anonymous

We moved from Bangkok to Costa Rica and the YAMAHA had the red light on, but no sound -or sign of life-

I looked under the piano and noticed a switch set to 220v (Thailand is 220v). I turned that to 110v and the Piano is back to life ...

just in case someone has that particular problem...

Jul 14, 2018
Rating
starstarstarstarstar
life saved
by: Anonymous

Speaker switch was off at the back after I moved! Thank you!

Jul 07, 2017
Rating
starstarstarstarstar
Clavinova pf p-100 with static
by: Paul

My Yamaha Clavinova PF P100 works fine but after it is on for a while lots of static noise comes out of the speaker. then it stops and 5 minutes later the static noise builds up again.

What could be wrong with it. Does anybody know? Does it have anything to do with the grounding of the plug?

Dec 29, 2015
Rating
starstarstarstarstar
no sound on grand piano 1 setting
by: Anonymous

During a group rehearsal today, I had no sound UNLESS the damper pedal was held the entire time which of course was then no sustain.

Ugh...After everyone left, I played with the piano sounds. I had sound with Grand Piano 2 and the sustain pedal worked fine.

It's the Grand Piano 1 setting where it doesn't work. Any thoughts on that? I didn't read anyones input about that scenario.

Hopefully, no trouble for a Recital tomorrow!

Aug 17, 2015
Rating
starstarstarstarstar
Clavinola PF100 Headphone plug
by: Damian

Brilliant!! Yes opened up Clav. thinking it may have been glass fuse but no. Hugely expensive to get expert out to fix, found this post, took another look and found headphone plug loose. Now working beautifully. Thank you.
One more small problem though.
Now can't get my 15 year old son off it!!
Any solutions?
Damian

Aug 07, 2015
Rating
starstarstarstarstar
Speaker Switch It Was
by: Anonymous

Soooooo glad for forums like this! We just moved an older Clavinova into the house and were dismayed when it didn't work. We turned to Google, and found this post. We easily found the speaker switch under the back section of the keyboard. Voila! Thanks!

May 23, 2012
Rating
starstarstarstarstar
Speaker Switch
by: Anonymous

Our Clavinova (CLP 120) has a speaker switch, which we found after we panicked and thought we had fried our piano! It's in a small recessed area under the left end of the keyboard. I had to lay on my back on the floor to look up and find it. Or think of it as above your left knee when playing -- but way over to the left end underneath the lowest notes on the keyboard. It's clearly marked (if you lay on the floor and look up) as "speaker" switch, with positions of on, off, and normal. On and normal work fine. Easy fix!!!

Mar 16, 2009
Rating
starstarstarstarstar
Fix for no sound
by: Tom Campos

When the keyboard is moved the board that makes the headphones & Speakers work, will sometimes get unplugged. This is a simple fix,: Open the keyboard and reconnect the wire that comes out from the back of the headphone logic board to the main unit logic board. Once this is done the speakers and headphones will have sound again.

Jan 23, 2009
Rating
starstarstarstarstar
Also
by: Markus Tinner

I do have the same problem no sound on my p-100 and the switch doesn't solve it. There is also no sound on the headphones...

Aug 02, 2008
Rating
starstarstarstarstar
Thank you so much!
by: Anonymous

I found the speaker switch on the back. That is exactly what the problem was. Thank you so much for your help!

Jul 31, 2008
Rating
starstarstarstarstar
no sound
by: Anonymous

I have a PSR-260, same problem, no sound, but I do not have a switch that I see to turn speakers off

Apr 20, 2008
Rating
starstarstarstarstar
P-100 with no sound after move
by: Jimmy Smith

You have a switch on the back that cuts off the speaker system. Odds are, you inadvertantly switched it off when you were moving the keyboard. Simply move the switch on the back to the other position and cut on the keyboard. The switch was put there in the event you do not want to use the onboard speakers.

Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Yamaha Keyboard Related Discussions.